Model |
Dispermill Discovery 100 |
Dispermill Discovery 200 |
Dispermill Discovery 300 |
Volume |
Dispermill capacities 100㎖ ~ 10ℓ | Dispermill capacities 100㎖ ~ 25ℓ | Dispermill capacities 100㎖ ~ 25ℓ |
Power |
0.75㎾ / 1HP |
1.50㎾ / 2HP |
2.20㎾ / 3HP |
speed |
0~12,000 rpm |
0~10,000 rpm |
0~4500 rpm |
Cooling |
Forced cooling, by low noise ventilator |
Supply |
230V ± 10%. 50 / 60㎐ |
400V ± 10%.3phases, 50 / 60㎐ |
400V ± 10%. 3phases, 50 / 60㎐ |
Torque |
1.3Nm |
2.7Nm |
7.6Nm |
Thermal protection |
Motor and electronics has overloading protection by PTC temperature sensors |
Plug & Play |
The dissolver will be delivered including 1.5 meter power cord with plug |
Height adjustment |
Electronic adjustable by ergonomic lever. Speed up and speed down 3㎝/s Configurable: - max. operating height
- required lowest position for best vortex flow
|
Stand column |
New compact design, electronic stand in solid stainless steel chemical resistant, flush and easy to clean |
Central Clamping system |
Two clamping arms with vessel detection and safety switch |
Suitable for containers |
100㎖ ~ 10ℓ (*adaptor required) |
100㎖ ~ 25ℓ (*adaptor required) |
100㎖ ~ 25ℓ (*adaptor required) |
Diameter container |
70㎜ ~ 260㎜ |
70㎜ ~ 310㎜ |
70㎜ ~ 310㎜ |
Max height container |
280㎜ |
430㎜ |
430㎜ |
Dissolver Shaft |
Dissolver shaft in stainless steel, the dissolver bearing house is provided with double bearings |
Dimensions |
470㎜ × 470㎜ × 715㎜ / 9906㎜ (D × W × H) |
485㎜ × 506㎜ × 846/㎜ 1276㎜ (D × W × H) |
485㎜ × 506㎜ × 846/㎜ 1276㎜ (D × W × H) |
Weight |
55㎏ |
68㎏ |
70㎏ |
Digital control panel | Display parameters of all processes on one display 5" TFT color touchscreen, tempered glass, easy to clean The display is located on the right side of the frame |
Control wheel | Rotary selector speed time / milling cutter / settings |
Countdown timer | Setting from 1 minute to 10 hours Automatic stop by preset time |
Data output | True shaft speed, constant rpm - Timer 1 min ~ 10 hours with hitchhiking
- Electricity consumption, W
- Torque
- Diameter of dispersing mill in ㎜
- Circumferential speed / calculation of peripheral speed in m/s
- Temperature display in ℃ or ℉ with optional PT100 temperature sensor
- Safty program for pre-set temperature with hitchhiking
- sound alarm
- Output of data on the position of the dispersing cutter above the table (height) in ㎜
|
Shaft protection | Removable shaft guard, stainless steel |